HOME PRODUCT Flat Bed CNC Lathe CK61125 CK61125X1500 CNC Lathe

PRODUCT

CK61125X1500 CNC Lathe
CK61125X1500 CNC Lathe CK61125X1500 CNC Lathe CK61125X1500 CNC Lathe CK61125X1500 CNC Lathe CK61125X1500 CNC Lathe

CK61125X1500 CNC Lathe

Product ID : CK61125X1500
Product Tags :
Product Attributes :

The CK61125X1500 is a heavy duty flat bed CNC lathe for large diameter and long shaft work: Φ1250 mm swing over bed, 850 mm over the cross slide, 1500 mm between centres and a Φ130 mm spindle bore. CE certified, with installation and overseas after-sales support.

Product Description

CK61125X1500 CNC Lathe

The CK61125X1500 is a heavy duty flat bed CNC lathe built for work that will not fit through an ordinary lathe spindle. A Φ1250 mm swing over the bed, a Φ130 mm spindle bore and 1500 mm between centres put it in the class of machines used for large shafts, thick-wall tubes and heavy flanges — the parts that usually force a workshop either to subcontract or to buy a much larger machine than the job needs.

The machine is CE certified, supplied with a full manual set, and backed by our overseas after-sales service network. Spare parts and technical support remain available for the working life of the machine.

Key Features

  • Φ1250 mm swing over bed — large diameter blanks clear the bed without riser blocks.
  • Φ130 mm spindle bore — bar and tube up to Φ130 mm pass straight through the spindle, so pipe work is bar-fed instead of chucked and indicated.
  • 850 mm swing over the cross slide — the working envelope stays usable at the cross slide, not only over the bed gap.
  • 1500 mm between centres — long shafts in a single clamping.
  • X / Z travel 520 mm and 1350 mm — matched to the 1500 mm centre distance of this model.
  • Rigid cast iron bed — heavy ribbed structure sized for interrupted heavy cutting.

Φ130 mm Spindle Bore for Tube and Pipe Work

The spindle bore is the specification that decides whether a machine can do pipe work economically. On a lathe with a Φ82 mm bore, a Φ114 mm tube has to be chucked on the outside and indicated in for every part. With a Φ130 mm bore the same tube passes through the spindle and is fed by the bar feeder — the setup disappears and cycle time stops depending on operator skill.

This is why the CK61125X1500 is common in oil and gas fittings, hydraulic cylinder tube and line pipe work, where the bore — not the swing — is the limiting factor.

1500 mm Between Centres in One Setup

Long parts lose accuracy every time they are re-clamped. Each new setup adds a fresh source of runout, and taper appears as soon as the free end is unsupported. Running the part over the full 1500 mm between centres of this model keeps straightness and concentricity a property of the machine rather than of operator care.

One Platform, Five Centre Distances

The CK61125 family is built on a single platform with centre distances from 1500 mm up to 6000 mm. The CK61125X1500 is the 1500 mm version — the shortest bed in the family, and the one that suits workshops that need the Φ1250 swing and the Φ130 bore but do not need to turn six-metre shafts. Longer beds (3000 / 4000 / 5000 / 6000 mm) are available on the same platform with proportionally longer Z travel and overall dimensions, and are quoted separately.

Specifying the shortest bed that clears your longest part is the cheapest decision on a machine of this size: bed length drives both the price and the floor space.

Rigid Bed for Interrupted Heavy Cuts

The bed is a heavily ribbed cast iron structure with a wide guideway span. Mass and stiffness matter for one reason — interrupted cuts, such as machining a square blank or a keyway, generate periodic impact loads that a light bed transmits straight into the workpiece surface. A rigid bed absorbs those loads and keeps the insert in cut, which is what makes heavy roughing economical instead of a finishing operation in itself.

CNC System and Configuration Options

The machine is supplied with a production CNC system and is configured against your process. Options typically specified with this model include:

  • Chuck size and type, including large bore configurations for tube work
  • Steady rests, fixed or travelling, for long shaft support
  • Tailstock configuration and live centre type
  • Tool post or turret arrangement matched to the operation sequence
  • Chip conveyor and coolant system for continuous heavy cutting

Configuration drives both cycle time and price, so the final specification is confirmed against your drawing before quoting.

Applications and Materials

The CK61125X1500 is used for heavy general turning across industries:

  • Oil and gas — line pipe, casing connectors, drill collars, large flanges
  • Hydraulics — cylinder barrels and thick-wall tube
  • Steel and paper — rolls, sleeves, mandrels
  • Heavy machinery — large shafts, tie rods, drive shafts

It machines carbon steel, alloy steel, stainless steel, cast iron and non-ferrous materials with the appropriate inserts and cutting parameters.

Technical Specifications

Model CK61125X1500
Max. swing over bed Φ1250 mm
Max. swing over cross slide 850 mm
Distance between centres 1500 / 3000 / 4000 / 5000 / 6000 mm
X axis travel 520 mm
Z axis travel 1350 / 2850 / 3850 / 4850 / 5850 mm
Spindle bore Φ130 mm
Overall dimensions (L×W×H) 2250 × 2300 × 5000 / 6500 / 7500 / 8500 / 9500 mm
Net weight 11.0 / 12.5 / 13.5 / 14.5 / 15.5 t

Distance between centres, Z travel, overall dimensions and net weight are listed for the full CK61125 platform: this model is the 1500 mm entry (Z travel 1350 mm, overall length 5000 mm, net weight 11.0 t). Longer beds are optional configurations on the same platform. Confirm the final data sheet with us before ordering.

Why Choose CK61125X1500

  • CE certified — documentation supplied for EU import and site acceptance.
  • Overseas after-sales service — engineers and spare parts support in Europe.
  • Φ130 mm bore — pipe work bar-fed instead of chucked and indicated.
  • Shortest bed on the platform — Φ1250 swing and Φ130 bore without paying for six metres of bed.
  • Factory direct — configuration, tooling and shipping handled by the manufacturer.

Request a Quote

Send us your part drawing, material, blank size and required cycle time. We will confirm the machine configuration, tooling package, delivery time and price, and provide the full technical data sheet with CE documentation.

Online Inquiry