HOME PRODUCT Flat Bed CNC Lathe CK6180 CK6180X2000 CNC Lathe

PRODUCT

CK6180X2000 CNC Lathe
CK6180X2000 CNC Lathe CK6180X2000 CNC Lathe CK6180X2000 CNC Lathe CK6180X2000 CNC Lathe CK6180X2000 CNC Lathe

CK6180X2000 CNC Lathe

Product ID : CK6180X2000
Product Tags :
Product Attributes :

The CK6180X2000 is a heavy duty flat bed CNC lathe built for long shaft and large diameter work: Φ800 mm swing over bed, Φ440 mm over the cross slide, 2000 mm maximum processing length and a Φ105 mm spindle bore. Supplied CE certified, with installation, commissioning and overseas after-sales support.

Product Description

CK6180X2000 CNC Lathe

The CK6180X2000 is a heavy duty flat bed CNC lathe designed for workshops that turn long shafts, thick-wall tubes, rolls and large flanges in one setup. With a Φ800 mm swing over the bed, a 2000 mm maximum processing length and a Φ105 mm spindle bore, it removes the need to split long parts into several operations — the usual cause of concentricity and taper problems on multi-setup work.

The machine is supplied CE certified, with a full manual set, and is backed by our overseas after-sales service network. Spare parts and technical support are available for the life of the machine.

Key Features

  • Φ800 mm swing over bed / Φ440 mm over slide — handles large diameter blanks without interference from the cross slide.
  • 2000 mm maximum processing length — long shafts, guide screws and rolls in a single clamping.
  • Φ105 mm spindle bore — bar work up to Φ105 mm passes straight through the spindle.
  • X/Z stroke 420/2000 mm with 0.001 mm minimum displacement unit for fine finishing passes.
  • Rigid cast iron bed — heavy ribbed structure that absorbs interrupted cutting loads.

2000 mm Between Centres for Long Shafts and Tubes

Long parts are the hardest turning work to keep straight: every re-clamping adds a new error source, and taper appears as soon as the part is unsupported. The CK6180X2000 keeps the part in one setup over its full 2000 mm length, so straightness and concentricity come from the machine, not from operator care.

Typical work includes hydraulic cylinder rods, extruder screws, paper mill rolls, ship propeller shafts and long tie rods for construction machinery.

Rigid Cast Bed and Heavy Cutting Capability

The bed is a heavily ribbed cast iron structure with a wide guideway span. The mass and stiffness matter for one reason: interrupted cuts — such as machining a square or slotted blank — generate periodic impact loads that a light bed transmits straight into the workpiece surface finish. A rigid bed absorbs those loads and keeps the insert in cut.

The saddle and cross slide are proportioned for the Φ800 mm work envelope, so the machine does not lose rigidity at the extreme of its swing.

Spindle, Workholding and Precision Feeds

The spindle bore accepts Φ105 mm bar stock. For shaft work the machine is normally run between centres with a live centre in the tailstock and, on long parts, a steady rest. The X and Z axes use servo drives with a 0.001 mm minimum displacement unit, which is what makes fine finishing passes and accurate shoulder faces repeatable.

Workholding, chuck type, steady rest configuration and tailstock are specified per order so the machine matches the parts you actually run.

CNC System and Configuration Options

The machine is supplied with a production CNC system and can be configured for your process. Options typically specified with this model include:

  • Chuck size and type, including large bore configurations for tube work
  • Steady rests (fixed or travelling) for long shaft support
  • Tailstock configuration and live centre type
  • Tool post or turret arrangement matched to the operation sequence
  • Chip conveyor and coolant system for continuous heavy cutting

Because configuration drives both cycle time and price, we confirm the final specification against your drawing before quoting.

Applications and Materials

The CK6180X2000 is used for heavy general turning across industries:

  • Oil and gas — long shafts, drill collars, pipe connectors
  • Hydraulics — cylinder rods, pistons, gland nuts
  • Papermaking and steel — rolls, sleeves, mandrels
  • Shipbuilding and heavy machinery — propeller shafts, tie rods, drive shafts

It machines carbon steel, alloy steel, stainless steel, cast iron and non-ferrous materials with the appropriate inserts and cutting parameters.

Technical Specifications

Model CK6180X2000
Max. swing over bed Φ800 mm
Max. swing over slide Φ440 mm
Max. cutting diameter Φ800 mm
Max. processing length 2000 mm
X/Z axis max. stroke 420/2000 mm
X/Z axis min. displacement unit 0.001 mm
Spindle hole diameter Φ105 mm
Overall dimensions (L×W×H) 4400 × 1900 × 2000 mm

Specifications are for the standard configuration. Options and custom requirements may change individual values — confirm the final data sheet with us before ordering.

Why Choose CK6180X2000

  • CE certified — documentation supplied for EU import and site acceptance.
  • Overseas after-sales service — engineers and spare parts support in Europe.
  • Heavy duty build — Φ800 mm swing with the rigidity to use it.
  • Factory direct — configuration, tooling and shipping handled by the manufacturer.
  • Long part capability — 2000 mm between centres in one setup.

Request a Quote

Send us your part drawing, material, blank size and required cycle time. We will confirm the machine configuration, tooling package, delivery time and price, and provide the full technical data sheet with CE documentation.

Online Inquiry