The CK6160X2000 CNC Lathe is a heavy-duty flat bed turning machine that swings 600 mm over the bed and holds 2000 mm of processing length, so long shafts, tubes, rolls and heavy cylinders that a short-bed lathe cannot span are machined in one setup. It cuts up to Φ600 mm in diameter, passes Φ82 mm through the spindle, and works on a 300/2000 mm X/Z stroke.
The CK6160X2000 CNC Lathe is a heavy-duty flat bed turning machine built for work that is both large in diameter and long in length: long shafts, hydraulic cylinder tubes, rolls, spindles, large flanges, hubs, bearing housings, valve bodies and heavy sleeves. It swings 600 mm over the bed and 310 mm over the slide, cuts up to Φ600 mm in diameter and holds 2000 mm of processing length, so parts that a short-bed lathe has to split into two setups — or refuse altogether — are finished here end to end in one clamping. The X/Z axis stroke is 300/2000 mm, the Φ82 mm spindle bore passes bar stock and tube, and the 0.001 mm minimum displacement unit on both feed axes holds size along the whole 2000 mm of travel. External turning, internal boring, facing, grooving and threading are completed in a single setup, so the datum never moves and the concentricity between the two ends of a long shaft is held by the machine rather than by the operator.
The number that defines the CK6160X2000 is the 2000 mm of processing length. A short-bed lathe can hold the diameter but not the length, which forces the shop into two setups, a翻转 and a re-indication — and every re-clamping is a fresh chance to lose the concentricity between the two ends of the shaft. On this machine a 2000 mm shaft, cylinder tube or roll is supported between centres and machined in one pass from end to end, so the journals at both ends share one datum. The 300/2000 mm X/Z stroke means the carriage actually travels the full length rather than running out of travel halfway, and the Φ82 mm spindle bore lets long bar and tube pass through the spindle instead of being cut to length first. For a shop that turns hydraulic cylinder tubes, pump shafts, conveyor rolls and long threaded spindles, this is the bed length that turns two operations into one.
The CK6160X2000 is built on a high-rigidity flat bed cast in one piece of high-strength iron and aged before machining, so the structure settles before it is ground rather than after the machine is installed. That rigidity matters more here than on a short-bed machine, because a 2000 mm bed carries the weight of a long workpiece and the leverage of a long tool overhang — a bed that deflects shows up directly as taper along the shaft. The guideways are hardened and ground, keeping the sliding surfaces accurate over years of production instead of developing the soft spots that appear as a taper along a long part. Heavy roughing cuts at the same spindle load shorten the cycle, and the finish stays consistent from the first part of the batch to the last.
The spindle system is designed for both bar work and heavy chuck work. The Φ82 mm bore passes bar stock and tube as standard, so long material can be fed through the spindle and supported at the far end instead of being limited by the chuck. Long, heavy parts need real support at the far end: with a tailstock and — on slender work — a steady rest, the machine holds the workpiece against the cutting forces instead of letting it push away and chatter. Precision ball screws and hardened guideways on both axes hold the 0.001 mm minimum displacement unit across the whole 2000 mm of Z travel, so the machine interpolates long tapers and radii and returns to a reference surface without losing position between passes. That is what keeps a long shaft parallel instead of conical.
The CK6160X2000 is delivered as standard with a GSK CNC system, a manual 3-jaw chuck, a manual tailstock, a standard tool post, a cooling system, centralized lubrication, a work light and a full protective enclosure. A hydraulic 3-jaw or 4-jaw chuck and a hydraulic tailstock can be specified for higher clamping force and shorter cycle times, and a hydraulic or servo turret with 6 or 8 stations keeps tool changes fast and repeatable on parts that need several tools. An automatic chip conveyor clears chips continuously on long runs, and a steady rest and follow rest support slender work along the 2000 mm bed. A bar feeder lets the lathe keep producing without an operator loading each workpiece. A spindle oil cooler, pneumatic system and precision measuring probes are available, and Siemens, Fanuc and KND control systems can be fitted on request.
The CK6160X2000 is widely used in automotive parts, construction machinery, mining equipment, energy equipment, hydraulic equipment, general machinery manufacturing and general-purpose component processing. With a 600 mm swing over bed, a 600 mm cutting diameter, 2000 mm of processing length and an 82 mm spindle bore it handles long shafts, cylinder tubes, rolls, spindles, large flanges, hubs, bearing housings, valve bodies, pulleys and heavy sleeves. It machines carbon steel, stainless steel, alloy steel, cast iron, aluminium and copper alloys across general turning, bore finishing, threading and related flat bed CNC processes. The actual application depends on the workpiece material, size and machining requirements.
| Model | CK6160X2000 |
| Max. swing over bed | Φ600 mm |
| Max. swing over slide | Φ310 mm |
| Max. cutting diameter | Φ600 mm |
| Max. processing length | 2000 mm |
| X/Z axis max. stroke | 300/2000 mm |
| X/Z axis min. displacement unit | 0.001 mm |
| Spindle hole diameter | Φ82 mm |
| Overall dimensions (L×W×H) | 4400 × 1700 × 1800 mm |
The CK6160X2000 gives a 600 mm swing, a 600 mm cutting diameter and 2000 mm of machining length with an 82 mm spindle bore, so long shafts, tubes and rolls are finished end to end in one clamping on a machine that costs far less than the alternative of a larger centre lathe plus a second operation. It combines a rigid aged casting with a 300/2000 mm X/Z stroke and a 0.001 mm minimum displacement unit, then adds hydraulic chuck, hydraulic or servo turret, steady rest, chip conveyor and bar feeder options so it can keep running unattended. Overseas after-sales service and CE certified machines are provided.
Contact us for the CK6160X2000 CNC lathe price, delivery time, configuration options and technical support. We provide overseas after-sales service and CE certified machines.